Deep Dive of the Day Reduced Downtime Upgrade for vCenter: how it works, and what VCF 9.1 asks of you
Sooner or later every VCF estate has a vCenter upgrade that isn't a quick patch: 9.0 to 9.1, or the 8.x to 9.x move that the 11 October 2027 end of service for vSphere 8 makes unavoidable. Broadcom's own guidance draws the line clearly. Broadcom's post on rapid vCenter patching in VCF 9.1 recommends Quick Patch for compatible maintenance patches, where vCenter changes "only those specific RPMs or binaries that have a code change", and Reduced Downtime Upgrade (RDU) for minor updates and major upgrades such as 9.0.0 to 9.1.0. It also points out that using RDU for a patch Quick Patch could handle "would increase the overall maintenance time", so pick the right tool for each job.
RDU is a migration rather than an in-place upgrade. As the vSphere 8 Update 3 RDU post explains, a new vCenter appliance is deployed, the current vCenter's data and configuration are copied across while it stays online, and then a switchover moves services to the new appliance. That switchover is the only outage, which the post says "typically takes less than 5 minutes"; Broadcom's older KB 313288, written for 8.0 Update 2, puts it at about 10 minutes. Since 8.0 Update 3 you can let the switchover run automatically or start it yourself, which is useful when you want the copy done in the afternoon and the cut-over in your change window.
The same 8.0 Update 3 post lists the topologies RDU handles: self-managed vCenters, vCenters managed by another vCenter (7.0 or later), Enhanced Linked Mode and vCenter HA. Two cautions come with that. In Enhanced Linked Mode, "Do not update multiple vCenter instances in parallel", so upgrade linked vCenters one at a time. With vCenter HA, RDU removes HA before the upgrade and reactivates it afterwards, but only orchestrates that for HA instances on 8.0 Update 2 or later; on anything older you deactivate and reactivate HA yourself.
VCF 9.1 adds a couple of conveniences. The What's new in vSphere for VCF 9.1 page says you can now "run on-demand pre-checks for RDU", like the regular patching pre-checks, and "download payloads automatically by using RDU as opposed to downloading an ISO image". It also notes that the vCenter VM hardware version moves from vmx-10 to vmx-17 with 9.1, worth knowing if anything in your tooling keys off the VM's hardware version. On the VCF side, the upgrade prerequisites ask you to "Allocate a temporary IP address for each vCenter appliance upgrade" from the management subnet (it can be reused), to take file-based or image-based backups of SDDC Manager and every vCenter and NSX Manager, and to take a cold snapshot of SDDC Manager.
The gotchas worth knowing come mostly from KB 313288. The target must be the same size as the source or larger. On the vCenter's portgroup, MAC Changes and Forged Transmits must not be set to "Reject", because that "could prevent from a successful upgrade". Don't run an RDU and a VAMI update at the same time, which "may lead to a corrupt vCenter Server", and keep it to one administrator at a time. If the upgrade fails, it reverts to the source automatically. If it succeeds, disconnect the old appliance's network adapter: the KB warns that powering the source back on cancels the upgrade and deletes the target. The KB is written for 8.0, so treat these as the mechanics 9.x inherits and check the 9.1 docs for anything newer.
For nested labs, budget datastore space and an address for a second vCenter appliance while both run side by side, and remember the portgroup setting above if your nested management network sits on a portgroup you've locked down. Andy's World found RDU cut downtime from over an hour with VAMI to about 10 minutes on 8.0.3, with one surprise: the ISO-based flow needed the original 8.0.3 ISO to hand. In 9.1 the automatic payload download should spare you that, but it's a good habit to keep the current ISO in your content library anyway.
Based on vCenter Server upgrades with the reduced downtime (KB 313288) Official vCenter Reduced Downtime Update in VMware vSphere 8 Update 3 (VCF Blog) Official What's new in vSphere, VCF 9.1 release notes Official Rapid Patching of VMware vCenter in VMware Cloud Foundation 9.1 (VCF Blog) Official Prerequisites for Upgrading the VCF Core Components Official Updating vCenter 8.0.3 to 8.0.3a with RDU (Andy's World)