Critical

VMSA-2026-0008.1 — Apply KB 460732 on 9.1.1 or KB 460734 on 5.2.x, 9.0.2 and 9.1.0, keep SDDC Manager reachable only from trusted admin hosts, and subscribe to the advisory so you see the patch the day it lands.

Details →
← All posts

Adding an Identity Source (LDAP) - Username Format Error

I recently needed to validate some permissions using LDAP as an identity source. I hadn’t actually had a need to add an identity source to my Lab until now, so I set about adding my lab domain as a source, but hit the following error when trying to add it.

Check the network settings and make sure you have a network access to the identity source

To start, I looked at connectivity, firewall rules, DNS forward and reverse lookup zones but still had the issue. It was none of these…

The issue? It was the format of the username… I originally used the format 'domain\user'. This doesn’t work. You need to use 'user@domain' !

As soon as I changed the format, the source added successfully.

Some VMware links on setting up identity sources if you need some extra info -

https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.psc.doc/GUID-B23B1360-8838-4FF2-B074-71643C4CB040.html

https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.psc.doc/GUID-B23B1360-8838-4FF2-B074-71643C4CB040.html

Hopefully this is useful to anyone facing this problem!

Thanks for reading.

Stephan McTighe

Infrastructure engineer, vExpert, and the reason the lab counter keeps resetting.

About me →
Ask a question
Thanks for visiting

Let's talk tech!

Questions, ideas, or just want to talk VCF? Drop me an email or find me on the socials.